TVO-2 Vacuum Oven

TVO-2 Vacuum Oven TVO-2 Vacuum Oven

Cascade TEK's Most Popular Vacuum Oven -
Model TVO-2 $4700 In Stock.  Made In USA.

The TVO-2 vacuum oven has a capacity of 1.7 cubic feet and is our most popular benchtop vacuum oven model. Cascade TEK is happy to offer everything you need for a complete vacuum drying system - including dry or wet vacuum pumps,connection kits and a variety of replacement door gaskets suitable to your application.

Important Vacuum Oven Features

Oven temperature is controlled via a Watlow programmable ramp and soak controller. (Ask about how it can be configured to automatically execute your vacuum drying process). The TVO-2 also includes a fully integrated digital overtemp protection controller. Vacuum is read in inches of Mercury (Hg) via a bourdon tube. Vacuum and purge hand valves are conveniently located on the front control panel. The purge valve is set up to allow for backfilling with N2. Rear Vacuum connections include: a 3/8" connection for the vacuum pump & 1/4" connection for purge / backfill. An additional KF25 vacuum connection is located in the rear center for feedthru or sensor connections. The TVO-2 also has 3 stackable aluminum shelves. Cascade TEK offers the appropriately sized connection kits and pumps to bring the entire system on line.

Automate Your Vacuum Drying Process

Cascade TEK can automate the TVO-2 to execute your vacuum drying process with the push of a button. This includes automatic opening/closing of vacuum/vent valves, automatic backfill sequence and temperature ramps, alarms and shut down. Our automated systems integrate specialty pumps, traps, serial communications and vacuum rated feedthrus based on your specific needs. Please inquire. Helpful Videos:

ModelTVO-2 Vacuum Oven
Capacity1.7 cubic feet
Interior Size WxDxH in. (cm)12"W x 20"D x 12"H (30.48 x 50.8 x 30.48)
Exterior Size WxDxH in. (cm)18.75"W x 26.5"D x 24.5"H (47.63 x 67.31 x 62.23)
Temperature RangeAmbient +10°C to 220°C
Temperature Uniformity+/-6.5% of setpoint
Temperature Time to 150°C90 minutes
Inert Gas IntroYes (via 1/4" hand valve)
Vacuum LevelBetter than 20 mTorr at 150°C
Vacuum PumpWet and dry pump options available and detailed on quote
Vacuum Gauge0-30”Hg (Needle Gauge, Bourdon Tube)
Ports3/8" Vacuum Connection, 1/4" Inert Gas Connection, KF-25 Port
ControllerWatlow EZ-Zone PM programmable control with ramp & soak capabilities and integrated over temperature limit. DB25 pin RS-485 serial comm port.
Power Requirements120V / 1Ph / 50/60Hz / 13 Amps
Heater Wattage1500 Watts
Shelves Included3 (Stackable)
Standard Door GasketSilicone 220°C Max (additional options available)
Weight145 lbs.
Shipping Info190 lbs.
Warranty100% 1 Year
CommentsAsk us about automation and customization options available for your specific application.
Get a Quote Button